BoltGuard kit is equipped with 3 tamperproof nuts; 2 used to mount the sign and 1 for installing. Accompanied with 2, one-way security bolts for the optimal theft proof sign mounting solution.
- Anti-theft hardware saves you time and money! Eliminate the need of replacing stolen signs with this low-cost invesment.
- Sign mounting hardware is compatible with our signs (3/8" holes) and posts (u-channel and square).
- Tamperproof nuts can be installed using a 7/8" wrench or an 8" adjustable wrench/pliers.
- Tamperproof nut's bevelved edge and one-way security bolt prevents removal with ordinary tools. Sign can only be disengaged from the backside using the installaltion nut.
- To install:
1. Tighten first nut by hand onto the back of the sign post.
2. Tighten the second nut, upside-down, on top of the first nut. The second nut locks with the first nut.
3. Insert a wrench in between the two nuts and tighten until secure.
4. When finished, remove second, top nut using a wrench leaving the first, bottom nut on the backside of the post. Save installation nut for next install or when you want to remove the sign.
Verified PurchaseNever RECEIVED! UPS shows DELIVERED! I was home when UPS arrived with only the stakes!
Never arrived! I was home when UPS came to make a delivery. He dropped off the open package of stakes that I had ordered for these signs. I ran out there and said, "Where is the rest of it?" And he said, "That's all I have to deliver" then sped off! I came onto my account and see that my $200 order shows delivered when all I got was an open package of stakes! Tried to get a hold of SmartSign - they are closed. Tried to call UPS immediately; they don't help the receiver. Contacting credit card company now.