Our Designer Visitor Parking SignatureSign collection focuses on architectural elegance blended well with durability. Available in four color schemes (Green, Burgundy, Burgundy Reversed, and Green Reversed), these dome-top designer visitor parking signs are made of 3M reflective aluminum metal. Signs are 80 mil thick and last for 10 years outdoors. 3M High Intensity Reflective surface makes the sign visible in dark and helps meet DOT requirements for parking lots.Designer signs look the part on upscale properties.
BigBoss A-Frame signs for visitor parkingare made from 160 mil thick corrugated plastic (sign panel). The sign panel is designed to fit into a heavy-duty thermoplastic frame with a contoured profile to deflect wind up to 30+ mph. You can add sand or water (or a mix of both for the heaviest option) to the ballast ports situated at the base of the A-frame for greater stability. EZ-Grip frame has built-in wheels on both sides for effortless rolling. The entire assembly is wide and sturdy, suitable for outdoors.
Yes. We offer custom Visitor Parking Sign templates that can be personalized with your company logo.You can even choose a clipart from our library or upload your custom graphic. The process of customization is very simple. On the template page, click on the “Personalize” button. A design page will appear. On this page, click on ‘Upload logo’ and a box will appear. Choose file from your device and then, click on the "Upload" button and your logo will be used for your sign. The better your graphic or logo, the better your print will come on the sign! You can even call our customer service and they can help you create a sign from scratch, at no extra cost!
We have Visitor signs in the shape of an arrow pointing in left and right directions, respectively. Only ‘Visitors’ sign is available in 6”x 12” and 9” x 18” sizes whereas ‘Visitor Parking’ sign is available in 6” x 24”.
There are many other Visitor signs with a left, right, or bidirectional arrow printed on them, all offered in different sizes.
The ‘Reserved For Visitors’ Cone Sleeve can be used with 36” high cones but it may fit a little loosely as some 36” cones tend to be slimmer towards the top.
Our Cone collar sign measures 10.25" x 9.5" and fits perfectly over standard 18" and 28" high cones, the most common sizes of traffic cones. Reflective sleeve is made of durable polyester and the message is printed 3 times on the sleeve for 360° degree viewing.
You can try our Visitor Parking SignBook™. You get twenty 14" x 10" plastic signs in each SignBook™ which can be torn from the book and attached indoors or outdoors using staples, nails, gun or tape.
Plastic Signs in Rip-Out SignBook are printed digitally and should last 1-2 years outside. Signs resist weather and tearing and can withstand chemical splash and moisture.
Our advice is to use reflective signs. Reflective visitor parking signs are better because they offer higher visibility in dark too. Reflective Visitor Parking Signs come in three grades - Engineer Grade, High Intensity, and Diamond Grade. Engineer Grade reflective signs offer a basic level of reflectivity. High Intensity Grade Reflective parking signs offer three times more reflectance than engineer grade reflective signs. 3M's prismatic high intensity, offers greater reflectance straight on, but is even brighter when approached from an angle. Diamond grade reflective signs offer ten times the reflectivity of Engineer grade signs. These signs combine high daytime conspicuity with superior nighttime reflectivity and wide angle reflective performance due to which the text can be read from any angle even in dark.
Most Reserved for Visitors Signs come without sign posts. You can purchase sign posts separately. We do offer a Visitor Parking Only Sign & Post Kit. The kit contains an aluminum sign, with a cast iron sign base, one post and attachment hardware kit. Post comes in two parts and when assembled is 4' tall and 1.625" in diameter. Posts are ideal for temporary parking accommodations and are easy to move – requiring no drilling for installation.
Yes, we have bilingual visitors parking signs in English and Spanish. Signs like “Welcome, Visitors Must Report To Office/Bienvenidos, Los Visitantes Deben Presentarse En La Oficina”, “Visitor Parking/Visitantes Solamente”, “Visitor Parking / Estacionamiento Para Visitas”, and “Visitor Parking Only/ Estacionamiento Para Visitantes Solamente” can help your Spanish visitors find the right parking spot. Bilingual signs keep guesswork and confusion out and save time.
You can use signs with messages like Valid Parking Permit Required, Parking By Permit Only, Visitor Parking by Permit Only, and Parking Permit Is Required To Park.
Such messages can be used along with the main text as “Visitor Parking” or Reserved For Visitors”. Additional warnings like “Unauthorized Vehicles Will Be Towed At Vehicle Owner’s Expense” would also help convey your message.
Consistently great
Always great signs with fast shipping!!!