Sidewalk Closed Signs - Page 3

Sidewalk closed signs should match how pedestrians should reroute. Sidewalk Closed (R9-9) simply closes the walk; Sidewalk Closed - Use Other Side (R9-10) is used when a parallel sidewalk exists across the street; and Sidewalk Closed Ahead - Cross Here (R9-11a) sends pedestrians to a crossing point to reach the alternate route. Pick the one that reflects where the safe path actually is.

Sidewalk closed signs are supposed to close and redirect before people reach the work, not at it. Post Sidewalk Closed Ahead - Cross Here at the last intersection where a pedestrian can cross, put Sidewalk Closed (R9-9) at the start of the closure on a barricade spanning the full width, and add "Use Other Side" where a parallel walkway exists.

Closing a public sidewalk generally requires a permit and a pedestrian temporary-traffic-control plan from your city or municipality, set up per MUTCD Part 6 with an accessible alternate route. The contractor or property owner doing the work is responsible for the closure and its signs. On private property, you can post sidewalk closed signs yourself while still keeping an accessible path.

To guide pedestrianse, use a sequence: Sidewalk Closed Ahead - Cross Here to move people across, Use Other Side (R9-10) where a parallel walk exists, and Use Temporary Walkway where you've built a covered or fenced path. Continuous barricades and detour signs keep the route obvious block to block.

Yes. A-frame and portable sidewalk sign kits stand on their own and fold flat, two-sided floor signs work on a walkway, and rigid aluminum signs come in Engineer, High Intensity, and Diamond Grade reflective so they read at night. All are built to hold up outdoors for the length of a project.

You can order any sidewalk closed sign online in the size, format, and reflective grade you need, with fast shipping. For a full pedestrian setup — signs, barricades, and detour markers together — call our sales team at 888-343-3771 (Mon – Fri, 8:00am to 7:00pm EST) or email customerservice@smartsign.com for a bulk quote.